This site is a static rendering of the Trac instance that was used by R7RS-WG1 for its work on R7RS-small (PDF), which was ratified in 2013. For more information, see Home. For a version of this page that may be more recent, see WG1BallotCowan in WG2's repo for R7RS-large.

WG1Ballot­Cowan

cowan
2012-07-09 22:41:51
40history
source

Instructions

WG1 Ballot Items To Finalize By July 31

WG1 - Core

#460 Semantics of eqv?

Earlier we voted on #125, #229 and #345 separately without regard to the formal semantics of eqv? from a top level. We need to first decide what the definition of eqv? is, and consider if there should be any exception cases as a secondary effect.

The debate is fundamentally one of whether we define eqv? in terms of "operational equivalence" as in R6RS or a simpler rule (e.g. resolve by =) as in earlier standards.

R2RS had the simplest historical rule which was simply to use =.

The term "operational equivalence" appears in R3RS but for numbers the definition is the same as in R4RS and R5RS, which is = plus the same exactness. This is the r5rs option.

R6RS defines two numbers to be "operationally equivalent" (and therefore eqv?) if they would return the same results for any finite composition of "Scheme's standard arithmetic procedures". Presumably this refers to everything in section 11.7 "Arithmetic", but not, for example, write. For R7RS this would be equivalent to all the standard procedures in the "Numbers" section 6.2.6, and is called the r6rs option. Alternately, the equivalence rules could include any procedure the implementation provides (such as decode-float) - this is the r6rs/all option. Operational equivalence is very desirable when implementing caches and programs which reason about programs.

In contrast to R6RS, R7RS does not require the full numeric tower. This means that any definition of operational equivalence would render many numbers unspecified from the perspective of the standard, yet users could rely on consistency within their own implementation, and broad agreement amongst most implementations which provide the full tower. For example, (eqv? 1/3 (/ 3.0)) is unspecified under any definition, because exact ratios may not be supported. However, (eqv? 0.0 -0.0) is specified and required to return #t under the r5rs rule, yet is unspecified under the r6rs rule - it would return #f for implementations which distinguish both -0.0 and -inf.0 (without which -0.0 does not produce different results from 0.0) and #t otherwise. Under r6rs/all, (eqv? 0.0 -0.0) should return #f under any implementation which would at least write -0.0 with the leading minus sign. Any notation using precision specifiers would also has undefined equivalence under the r6rs rule, e.g. (eqv? 1e0 1f0).

Keep in mind the semantics of eqv? also affect memv, assv and case.

#229 eqv? and NaN

As announced previously this is being re-opened due to incorrect formulation in the previous ballot, and in response to formal comment #423.

Regardless of the result of #460, the semantics implies that eqv? return #f on comparing any two NaN objects. It is reasonable to want to consider any two NaNs as the "same" since they behave the same under any operation, even though none of the results are =. In deference to this R6RS makes an exception and allows the result to be unspecified, and we should consider allowing this exception.

The "same" options from previous ballots have been removed, pending an alternate formulation of the semantics of #460 in which this would make sense.

The default of unspecified still holds from the previous invalidated ballot.

#125 Allow procedures not to be locations (making EQV? unspecified in some additional cases)

Procedures are another case for contention with eqv?. In R3RS, an operational equivalence was defined for procedures, and this was subsequently removed.

R6RS went the other direction and allowed the exact same procedure x to return #f for (eqv? x x), and R7RS currently reaffirms this. The rationale behind this is for compiler optimizations such as inlining local procedures, that is given:

(let ((square (lambda (x) (* x x)))) (eqv? square square))

it is reasonable for a compiler to perform the optimization:

(eqv? (lambda (x) (* x x)) (lambda (x) (* x x)))

in which case the result would naturally return #f.

Vote yes to allow the result to be #f.

The default of yes still holds from the previous invalidated ballot.

#393 Defining record equality

Currently, R7RS-small says that when equal? is applied to records that are not eqv? (that were constructed by different calls to the record constructor), the result may be #t or #f at the implementation's discretion. The proposal is to treat records of the same type like pairs, strings, vectors, and bytevectors: that is, their contents are recursively compared.

Vote recursive to require recursive comparison of the record's fields, identity to return #t iff eqv? does, and unspecified to leave this open.

Note equal? is already required to handle cycles regardless.

#306 What does "full Unicode" support mean in Appendix B?

Specifically, does it indicate case-folding and normalization support for the repertoire of any particular version of Unicode, or any version greater than 5 or 6 or 6.1, or no particular version?

Full unicode refers to the set of characters available. Case-folding and character predicates are required to work according to the Unicode standard for all supported characters. The question of which version of Unicode the property refers to is important. We could require a specific version (and all further revisions), or always require the latest official Unicode standard, in which case an implementation would not be compliant until it was updated with each new standard.

#458 Remove the formal semantics from the report

There have been a bunch of complaints about the formal semantics: it's incomplete, it cannot be mechanized with a proof assistant, it doesn't help either users or implementers very much, and so on. See in particular #453.

The semantics have been updated to include dynamic-wind, however the other arguments still hold.

This proposal is to remove it from the report altogether, and to urge the Steering Committee to create a new WG to produce one, likely in a "rolling" style with increasingly comprehensive releases, on its own schedule. Some members of the current WG have expressed interest in serving on such a group, and others have expressed their complete lack of interest, so a new WG seems the best choice if this is done.

Alternately, we can adapt the operational semantics from R6RS.

#398 Allow repeated keys in case

R5RS says it's an error for a key to appear in more than one clause of case (or twice in the same clause, but that's trivial). R6RS allows the same key to appear more than one clause, but insists on left-to-right testing throughout, like cond. The R6RS editors thought this was better for machine-generated code, though worse for hand-written code.

The proposal is a compromise: allow keys to appear in more than one clause, but behave as if the key appeared only in the first (leftmost) clause. This allows hash-table or other non-left-to-right implementations.

#85 Blobs, bytevectors, byte-vectors, octet-vectors, or something else?

Following exactly in the footsteps of R6RS we voted for a blob API and then changed the name to bytevector.

Formal comment #435 argues that u8vector is in more common use, so this item is being re-opened. The default is the current draft bytevector, and for any member leaving the preferences are left blank their votes from ballot 3 will be used.

WG1 - Library System

#353 No use before import in libraries

For ease of implementation, the proposal is to make it an error for an imported identifier to be referenced or defined in a library before the library declaration that imports it. This allows strict left-to-right processing of library declarations, with no need to delay processing till the end of the library.

Therefore, this would be an error (but still permitted as an extension in Schemes that can easily provide it):

(module (begin (define x y)) (import (library defining y))

This would necessitate replacing the penultimate paragraph of section

  1. 5.1 with:

One possible implementation of libraries is as follows: After all cond-expand library declarations are expanded, a new environment is constructed for the library consisting of all imported bindings. The expressions and declarations from all begin, include, and include-ci declarations are expanded in that environment in the order in which they occur in the library declaration. Alternatively, cond-expand and import declarations may be processed in left to right order interspersed with the processing of expressions and declarations, with the environment growing as imported bindings are added to it by each import declaration.

Vote yes to add the restriction, or no to leave it out.

#359 Limit numbers used in library names

This is a proposal to limit numbers in library names to the range 0 to

  1. Currently, there is no portable lower bound which all Schemes

can assume as the maximum size of an integer.

Numbers are mostly used for SRFI-based libraries anyway, which are not likely to reach either limit.

The option uint15 for the proposal as stated (0 to 32767), int16 for -32768 to 32767, int24 for -223 to 223-1, etc.

Vote unspecified to make no explicit requirement on the integers allowed in library names.

#441 Make sure a program/library loads any imported libraries at most once

Add the following text to the discussion of library loading:

Regardless of the number of times that a library is loaded, each program or library that imports bindings from a library will receive bindings from a single loading of that library, regardless of the number of import or cond-expand declarations in which it appears.

to make it clear that, for example,

(import (prefix (foo) 'foo:)) (import (only (foo) bar))

will cause bar and foo:bar to come from the same instantiation of the library '(foo)'

Vote yes to add this requirement.

#402 Add an export-all form.

Add an export-all form to the library declaration that means "export all identifiers that are defined in the library with begin, include, and include-ci but none that are imported with import."

#448 Add library declaration include-library-declarations

The proposed include-library-declarations allows a library to incorporate a file containing arbitrary library declarations, not just Scheme code (definitions and expressions). This allows, for example, the exports of a module to be written directly in the library file, and its imports in a separate file.

An alternative would be something like (export-from <library>) to export the same bindings as another library. This does require the clumsiness of actually defining the identifiers in the other library if it is abstract.

#449 Clarify library loading rules

R7RS currently says:

Within a program, each imported library is loaded at least once, and, if imported by more than one program or library, may possibly be loaded additional times.

Richard Kelsey thinks this is too liberal, and proposes:

Regardless of the number of times that a library is loaded, each program or library that imports bindings from a library will receive bindings from a single loading of that library, regardless of the number of import or cond-expand forms in which it appears.

Aaron Hsu, however, thinks this is too restrictive, and proposes (backed up by actual R6RS implementations):

If a library's definitions are referenced in the expanded form of a program or library body, then that library must be loaded before the expanded program or library body is evaluated. This rule applies transitively.

Similarly, during the expansion of a library, if a syntax keyword imported from a library is needed to expand the library, then the imported library must be visited before the expansion of the importing library.

WG1 - Numerics

#366 Add (log z b) for logarithm of z to the base b

Coverage for this R6RS feature is currently sparse: only Gauche, Chez, Vicare, Larceny, Ypsilon, Mosh, IronScheme, KSi, RScheme, Rep support it. But it is convenient when working in bases other than e such as 10, 2, or 16, and it is just a few extra lines of code, since `(log z b) => (/ (log z) (log b))` for arbitrary complex numbers z, b.

Vote yes to add the optional second argument from R6RS.

#367 Inexact division by exact zero

Draft 6 says that it's an error for an argument of / (other than the first) to be an exact zero. R6RS, however, says that it's an error only if all the arguments are exact. In other words, (/ 2.0 0) is an error according to the draft, but in R6RS it returns +inf.0 (assuming the implementation supports it). The proposal is to adopt the R6RS wording.

Cowan tested (/ 2.0 0) in the usual set of Schemes:

Vote error for the current draft semantics that it is an error, all-error for the R6RS semantics that it is only an error if all arguments are exact, or unspecified to make this case unspecified.

#369 Require that - and / allow an arbitrary number of arguments

R5RS requires that - and / accept one or two arguments, and labels support for more than two as "optional". R6RS requires such support. The proposal is to require it.

All Schemes in the test suite support more than two arguments except Scheme48/scsh. (Owl Lisp does not support variadic procedures of any kind.)

Vote require for required n-ary behavior and optional to leave it optional as in R5RS. Alternately, vote forbidden to make this always an error in all implementations.

#370 Log of exact and inexact zero

R5RS and draft 6 of R7RS don't say what (log 0.0) and (log 0) return. R6RS requires -inf.0 and an exception respectively. The proposal is to say that (log 0.0) returns -inf.0 on systems that have -inf.0, and that (log 0) is an error.

In Racket, Gambit, Chicken (with the numbers egg), Guile, Chibi, Chez, Ikarus/Vicare, Larceny, Ypsilon, Mosh, IronScheme, STklos, Spark, (log 0.0) returns -inf.0 and (log 0) raises an exception.

Gauche, MIT, Chicken (without the numbers egg), Bigloo, Scheme48/scsh, Kawa, SISC, SCM, NexJ, KSi, RScheme, XLisp, Rep, VX, SXM, Inlab return -inf.0 in both cases.

Elk, UMB, Oaklisp raise an exception in both cases.

Scheme 7 returns the wrong answer in both cases.

SigScheme, Shoe, TinyScheme, Dream, BDC, Owl Lisp don't support log.

Scheme 9 apparently goes into an infinite loop in both cases.

Vote r6rs for the R6RS behavior of returning -inf.0 and raising an error, respectively. Vote infinity to always return -inf.0.

#407 Dividing exact 0 by an inexact number

This proposal allows (/ 0 x), where x is an inexact number, to return an exact value. Currently only Racket, Gambit, TinyScheme, Sizzle, Spark do this; see Zero for details.

Vote zero to allow (but not require) this to return exact 0. Vote no-nan to allow it to return 0 except when x is +nan.0, where it would return +nan.0.

#410 Infinity vs. NaN in max and min

Currently R7RS says nothing about the value of (max +inf.0 +nan.0) or (min -inf.0 +nan.0). R6RS required these functions to return the infinite value, but this was adopted by some but not all R6RS implementations (see MaxInfNan for details). R5RS implementations are also divided.

The proposal is to allow R7RS implementations to provide either value.

Vote both to explicitly add a note that either are allowed, infinity to require the infinite value as in R6RS, nan to require returning +nan.0, and unspecified leave unspecified (i.e. the same as both but without the note).

#395 Infinite and NaN complex numbers

Currently both infinite? and nan? return #t to a complex number like +inf.0+nan.0i. Is this the Right Thing, or should infinite? only return #t if neither part is a NaN?

Note it is reasonable for an implementation to not support partial nan complex numbers.

Vote disjoint to ensure that infinite? and nan? are disjoint predicates as in the proposal, or overlap to allow the current behavior.

#364 truncate, floor, ceiling round should return a non-finite argument

Currently R7RS is silent on what truncate, floor, ceiling, and round do when the argument is +inf.0, -inf.0, or +nan.0. R6RS has them return the argument, which seems reasonable.

Tests were made for (round (* 1.0e200 1.0e200)) on a variety of implementations.

Racket, Gauche, Chicken (with and without the numbers egg), Bigloo, Guile, Kawa, Chibi, Chez, SCM, Ikarus/Vicare?, Larceny, Ypsilon, Mosh, IronScheme, NexJ, STklos, KSi, Shoe, BDC, Rep, Schemik, Elk, Spark all return the argument.

MIT, Gambit, Scheme48/scsh, SISC, Scheme 9, Scheme 7, signal errors.

SigScheme, TinyScheme, Dream, UMB don't work for one or another reason.

Oaklisp and Owl Lisp don't do flonums.

XLisp only has fixnums and flonums, and returns the largest or smallest fixnum as the case may be.

RScheme returns a variety of slightly strange values: (round +inf.0), for example, is 0, but (round -inf.0) is -inf.0.

Vote input to return the input, error to specify "it is an error", and unspecified to leave unspecified as in the current draft.

#392 Exact positive and non-negative integer predicates

There are two useful subsets of the exact numbers, both of which are commonly called natural numbers, depending on who's talking. Logicians, set theorists, and computer scientists include 0, other mathematicians mostly don't. This proposal adds the predicates exact-positive-integer? and exact-non-negative-integer?, analogous to exact-integer?. Because of the ambiguity, the name natural-number? is not proposed.

Vote yes to add these two procedures.

WG1 - Read/Write

#380 Is support of TAB as a whitespace character required or not?

  1. 2 says:

Whitespace characters include the space and newline characters. (Implementations may provide additional whitespace characters such as tab or page break.)

However, 7.1.1 has:

<intraline whitespace> -> <space or tab> <whitespace> -> <intraline whitespace> | <newline> | <return>

So 2.2 implies that supporting tabs is allowed but not required, yet

  1. 1.1 implies supporting tabs is required.

Vote required to require support for tab as a whitespace character by read. char-whitespace? is required to return #t for it regardless.

#388 Specify what display does with circular lists

Currently we don't specify what display does with circular lists. Should it generate labels like write, or loop like write-simple, or leave it unspecified?

#447 #!fold-case and #!no-fold-case have no final delimiter

The #!fold-case and #!no-fold-case directives are read as comments, which means that they are treated as whitespace (section

  1. 2). Unlike the other kinds of comments, their final delimiter is

implicit. This means that (1#!no-fold-cases) reads as (1 s). This seems unfortunate.

#442 write procedure is not backwards compatible

There is concern that the output of write cannot be read by non-R7RS implementations. This is not a strict requirement, but is reasonable if using simple sexp-based file/interchange formats.

Specifically, even though there are no cycles in

(let ((x (list 2))) (write (list x x)))

it previously output "((2) (2))" but now outputs "(#0=(2) #0#)".

The WG concern is that R5RS write is unsafe, easily causing infinite loops, and should therefore not be the default. Thus we renamed this "write-simple", requiring programmers to know they are writing a "simple" data structure up front.

Arguably, there are three procedures desired:

although even for write-shared people sometimes want to treat containers such as strings separately.

Note the algorithms for detecting shared structure differ from those for detecting cycles, so providing both -shared and -cyclic imposes an additional implementation burden.

#443 Recommend sources of character names

Currently, we allow implementations to provide their own names for characters, but provide no guidance for them. There are two plausible sources: the names in the Unicode Standard, and the [http://www.w3.org/TR/xml-entity-names/ entity names specified by W3C] for use in HTML, MathML, and other markup standards (ultimately derived from ISO SGML character entity sets).

The Unicode names are in all upper case and contain significant spaces and apostrophes as name characters, which would require some mapping to make valid Scheme identifiers. The W3C name list is incomplete though fairly large (currently 2237 names), covering mainly the Greek and Cyrillic scripts and non-ASCII punctuation and symbols. It distinguishes between iota (small) and Iota (capital).

Vote w3c for the W3C list, unicode to use the Unicode list with names mapped by converting to lowercase and replacing any non-identifier character (space and apostrophe) with hyphens. Vote unspecified to leave the character name extensions entirely up to the implementation.

WG1 - Base Library

#140 Removing quotient, remainder, modulo

With the acceptance of #278, we reduced the set of division operators to truncate-* and floor-* and move these into the base library. Three of these procedures are simply aliases for quotient, remainder and modulo, so it is worth considering removing the old names.

Since the old names are in IEEE Scheme we need strong justification for removing them from (scheme base), and even if we do so they will remain available in (scheme r5rs).

We have precedence for changing names, but only in the case when the existing names were both actively misleading and had already been changed in R6RS. Specifically, in ticket #328 we replaced the names inexact->exact and exact->inexact with the more accurate exact and inexact.

Arguably the new division operator names are clearer, but the old names are not actually misleading.

Vote yes to remove the old names from (scheme base), or no to leave them in as aliases.

#378 Rename GET-FEATURES to just FEATURES

This is compatible with Chicken, and "more Scheme-like, less Java-like". Okay, it's bikeshedding.

#384 Merge bytevector-copy and bytevector-copy-partial

Under this proposal, the name would be bytevector-copy and the signature would be

(bytevector-copy bytevector [start [end]])

Vote yes for this simplification.

#385 Merge write-bytevector and write-bytevector-partial

One proposal is port-last with a signature of:

(write-bytevector ''bytevector'' [''start'' [''end'' [''port'']]])

This has the disadvantage of being required to call bytevector-length when writing to a specific port.

Alternately we could do offsets-last:

(write-bytevector ''bytevector'' [''port'' [''start'' [''end'']]])

which has the disadvantage of separating the bytevector from its offsets.

Alternately, vote separate to keep these as two separate procedures.

#387 Add start/end arguments to string->vector and vector->string

This is a proposal to add optional start (inclusive) and end (exclusive) arguments to string->vector and vector->string. We now have start (inclusive) and end (exclusive) arguments for string->list and vector->list, but our non-R5RS and non-SRFI procedures to convert directly between strings and vectors don't provide these.

Vote yes to add these optional arguments.

#391 Add predicates for R7RS signalled conditions

R7RS requires an error to be signalled (which means an exception is raised as if by raise) in the following circumstances:

  1. Trying to open for input or delete a file that does not exist or is otherwise inaccessible.
  2. Specifying an argument to scheme-report-environment that the implementation doesn't support. (It must support 7 and may support other values.)
  3. An EOF is encountered while read is in the middle of a datum.
  4. Using expt to raise zero to the power of a non-real number (alternatively an arbitrary number may be returned).

This proposal is to provide four standard predicates that identify these specific conditions, to be used in guard clauses or in with-exception handlers as a portable means of detecting these errors. Although these predicates may return #t on other objects, if one reports #t on an object, the others must report #f. Proposed names are file-error?, scheme-report-error?, read-error?, and expt-error? respectively.

Vote yes to add these procedures, or file-only to only add the file-error? predicate.

#400 Define record? .

We should define the predicate record? so that it's possible to distinguish instances of record types from all other types. It should not be necessary to enumerate all record type predicates in order to determine whether an object is an instance of a record.

This is Alexey Radul's suggestion.

#425 Add read-string, read-string!, write-string procedures to (scheme base)

This was requested by Formal Comment #424.

These procedures would be provided for parallelism with the byte-vector I/O operations:

Byte

Character

Bytevector

String

read-u8

read-char

read-bytevector(!)

read-string(!)

write-u8

write-char

write-bytevector

write-string

If #385 passes, optional start (inclusive) and end (exclusive) index arguments would be added to write-string. Otherwise write-partial-string would be provided.

Vote yes to add all three, immutable to add only read-string and write-string, or no to leave them out.

#433 full conversion cycle for containers

Marc Feeley proposes it should be possible to convert from any container type to another, possibly via an intermediary such as

(list->B (A->list a))

proposing specifically "list" be the universally available intermediary, although "vector" would also be worth considering.

The container types are list, vector, string and bytevector. String and bytevector are second-class in that they are not general-purpose container types, and may raise errors converting from lists or vectors.

Vote list for the proposal to add the following procedures to complete the cycle:

Vote vector to add the equivalent procedures to allow converting between any of the types and vectors, specifically the following two new procedures:

The latin-1 proposal also adds the Latin-1-centric ideas of string to bytevector conversion, where each element of the bytevector is converted to/from a character with char->integer/integer->char.

The matrix proposal requires all 43=64 conversions.

#444 Add vector-append procedure

This is for completeness with append and string-append. See #436 for the Formal Comment that triggered this ticket.

#451 Add bytevector-append procedure

This is for consistency with append, string-append, and vector-append (per ticket #444) procedures. It is useful for the reconstruction phase of divide-and-conquer algorithms on arbitrary byte sequences.

#445 Bidirectional ports and port-open?

Replace port-open? with input-port-open? and output-port-open?, since a bidirectional port can be closed on one side without the other. See Formal Comment #439.

Vote replace to replace port-open? with just the two new versions, or add to have all three.

#450 Eliminate default for fill argument in vector-copy

Marc Feeley writes:

It is a bad idea for the fill parameter of vector-copy to have a default. When fill is absent, it should be an error when start and end are not within the bounds of the sequence. Otherwise, some index calculation errors (off-by-one on end) may go unnoticed. Moreover, when it is supplied, fill should also be used when start is less than 0, for consistency with the case where end is greater to the length of the sequence.

Vote required to make the fill parameter required, error to make it an error in the case that fill is absent yet needed, or default for the current status quo.

#404 Make handlers take a raise-continuable? argument.

Pass exception handlers a second, Boolean argument that declares whether the exception is continuable.

WG1 - Optional Libraries

#373 (exit #t) should be the same as (exit)

See Formal Comment #372 for the argument. Cowan writes: "I support this proposal. I don't support the alternative proposal to just say that any true value reports success and only #f reports failure, for there is usually only one kind of success (0 on Posix and Windows, "" on Plan 9, 2 on VMS) and many kinds of failure."

It is reasonable and convenient to use #t/#f as generic success/failure for portable programs, with (exit) as a shorthand for the "normal" completion (exit #t).

Another reasonable extension is fallback for certain success values that the implementation cannot understand. Specifically, 0 is commonly used for success on Posix systems, and the empty string "" as success on Plan9. We could require that if the implementation does not know how to pass these value types (string or number) to the OS, then it should recognize 0 and "" as true. Any value other than these which cannot be passed to the OS should be treated as a generic error. That way, a program written for Posix that alternatively uses (exit 0) and (exit <n>) will still work as desired on a Plan9 system, only losing details of the type of failure (and likewise for Plan9 programs running on Posix).

In either case, unless someone makes a proposal to the contrary, unknown values should always be treated as generic failure, and never raise an exception or fail to exit (from #374).

#375 Add EMERGENCY-EXIT procedure

This procedure provides instant guaranteed process exit without running dynamic-wind thunks. This is a low-level and dangerous procedure.

Vote emergency-exit to add this procedure, or no to leave it out. If you want to write in an alternate name, be sure to include emergency-exit as a secondary option after it.

#394 Ditching SCHEME-REPORT-ENVIRONMENT and NULL-ENVIRONMENT

Cowan writes:

"I have reluctantly come to the same conclusion as the R6RS editors: that in a Scheme with libraries, scheme-report-environment and null-environment don't make much sense. They are not in IEEE Scheme or R4RS, so there is no formal barrier to removing them.

"Semantically, scheme-report-environment holds all the identifiers in R5RS, excepting any which the implementation doesn't provide, like make-rectangular if it does not have complex numbers. Null-environment, on the other hand, contains only the syntax keywords with none of the standard procedures: it is not an empty environment. R6RS preserves these procedures only in the R5RS compatibility library, where they expose only R5RS content.

"When adapting the definition to R7RS, I changed scheme-report-environment to contain all the identifiers in all the standard libraries that the implementation provides, and null-environment all the syntax keywords in those libraries. This was the best I thought I could do, but now I think that it provides very little utility.

"It's possible to construct any specific environment you want by using the environment procedure, which turns a sequence of import-specs into an environment. In particular, we now have the (scheme r5rs) library, which essentially provides what (scheme-environment-procedure 5) should provide, and there is no portable use of any argument other than 5."

Vote remove to remove these two procedures entirely, or move to move them from (scheme eval) and provide them only as portability options in (scheme r5rs), where only the argument 5 is required to be supported. Vote keep to leave them as-is.

#413 EVAL accepts DEFINE

The proposal is to require eval to accept definitions as well as expressions, as long as the specified environment is mutable. See EvalDefine for which Schemes already handle this.

#399 clarify which primitives are allowed to implicitly force

The standard allows the following extension to force:

Some implementations may implement "implicit forcing," where the value of a promise is forced by primitive procedures like `cdr' and `+'

We should remove this note or tighten the definition.

A simple definition is any primitive that would require a type-check can perform implicit forcing. This would include all type predicates themselves except for promise?. Note if #405 passes, then in implementations which support this extension an object could return #t for promise? in addition to one other type.

#405 Make promises first-class

Currently there is no way to inspect an object to see if it's a promise. This proposal makes promises first-class by adding a promise? predicate. It also requires that if the argument to make-promise is a promise, it is returned without rewrapping it, and that if force is given a non-promise argument, it returns it unchanged. (These things cannot be provided by the user without a promise? predicate, and are trivial to provide with it.)

Vote disjoint to add promise? and make it a disjoint type, or yes to add it as a not-necessarily disjoint predicate.

#462 end of line definition

The definition of read-line allows implementation defined extensions to the set of end of line sequences. This is arguably too loose, as an implementation could define "a" as and end of line. On the other hand, if we do want to leave this in it may make sense to remove "\r", which is no longer used in any contemporary OS.

Vote no-extensions to forbid implementation defined extensions, no-return to remove a single return from the list of required end of lines, and none to leave as-is.

#452 provide digit-value support for hex-digits

In ballot 4, in symmetry with the new Unicode definition of char-numeric? and as an analog to CL's digit-char-p, we provided digit-value.

An informal comment was made questioning this procedure, and suggesting if provided at all it be extended to hex digits.

Vote ascii-hex to support only the ASCII hex digits a-f,A-F (in addition to full Unicode numeric digits), unicode-hex to support all Unicode variants of a-f,A-F (need to define formally), remove to remove digit-value entirely, or keep to keep as is.

WG1 - Non-normative

#411 Reference implementation

Our charter calls for one or more reference implementations. As of today, Chibi is very close to being so. The proposal is to bless it as a sample or model implementation, but not technically a reference implementation -- if it disagrees with the standard, the standard wins.

#463 library naming conventions

We currently use the singular form of data types for library names,

  1. g. (scheme char) and (scheme file). R6RS prefers the plural, as

in (scheme lists) and (scheme records). We should decide officially which is preferred.