This site is a static rendering of the Trac instance that was used by R7RS-WG1 for its work on R7RS-small (PDF), which was ratified in 2013. For more information, see Home.

Source for wiki DatagramChannelsCowan version 8

author

cowan

comment


    

ipnr

74.68.112.189

name

DatagramChannelsCowan

readonly

0

text

== Datagram channels ==

Datagram channels are a mild abstraction of UDP sockets.  They are a disjoint type.

In the following descriptions, ''host'' and ''local-address'' are strings, which may be IPv4 dotted-decimal addresses, IPv6 colon-hexadecimal addresses if supported by the operating system, or host names to be looked up according to whatever operating system conventions exist, if any.  Appropriate strings may refer to broadcast or multicast addresses.  ''Port'' may be an integer or a string; the meaning of a string is implementation-dependent, but is intended to be a standardized service name.

== Procedures ==

`(make-datagram-channel `[''local-address'']` `[''port'']`)`

Returns a new datagram channel suitable for sending and receiving datagrams.  If ''port'' is omitted, the channel will receive datagrams that are sent to a unused port assigned by the operating system over any local address.  If ''port'' is present but ''local-address'' is omitted or has the value `#t`, the channel will receive datagrams that are sent to ''port'' over any local address.  Otherwise, the channel will only receive datagrams sent to the specified local address and port.  If there is exactly one argument, it is ''port'', as this is the more common case.  In Posix terms this is `socket()` immediately followed by `bind()`.

`(make-output-only-datagram-channel)`

Returns a new datagram channel only suitable for sending datagrams.  It is not bound to any port.  In Posix terms this is `socket()`.

`(datagram-channel? `''obj''`)`

Returns `#t` if ''obj'' is a datagram channel and `#f` otherwise.

`(datagram-channel-local-address `''channel''`)`

Returns the local address on which ''channel'' receives datagrams, or `#t` if datagrams are accepted on all local addresses, or `#f` if there is no such local address.  The value returned need not be the same as the value passed to `make-datagram-channel`, but must be acceptable to another invocation of `make-datagram-channel`.

`(datagram-channel-port `''channel''`)`

Returns the port number on which ''channel'' receives datagrams, or `#f` if there is none.  The value returned need not be the same as the value passed to `make-datagram-channel`, but must be acceptable to another invocation of `make-datagram-channel`.

`(datagram-channel-send-to `''channel''` `''host''` `''port''` `''bytevector''` `[''start'' [''end'']]`)`

Send the portion of ''bytevector'' defined by ''start'' (inclusive) and ''end'' (exclusive) to the endpoint specified by ''host'' and ''port'' using ''channel''.  If ''end'' is omitted, it is the length of ''bytevector'' plus one; if ''start'' is omitted, it is 0.  Returns undefined values.  In Posix terms this is `send()`.

`(datagram-channel-receive-from `''channel''` `''bytevector''` `[''start'' [''end'']]`)`

Receives a datagram from ''channel'' into the portion of ''bytevector'' defined by ''start'' (inclusive) and ''end'' (exclusive).  If ''end'' is omitted, it is the length of ''bytevector'' plus one; if ''start'' is omitted, it is 0.  Returns three values: the sending host, the sending port, and `#t` if the datagram was complete or `#f` if it was truncated.  It is an error to invoke this procedure on an output-only datagram channel.  In Posix terms this is `recvfrom()`.

`(datagram-channel-connect! `''channel''` `''host''` `''port''`)`

Connects ''channel'' to a remote endpoint specified by ''host'' and ''port''.  Datagrams can be sent to this endpoint using `datagram-channel-send`, but it is still possible to send datagrams to other endpoints using `datagram-channel-send-to`.  When connected, a datagram channel will ignore datagrams that do not come from the specified remote endpoint.  Returns undefined values.  In Posix terms this is `connect()`.

`(datagram-channel-disconnect! `''channel''`)`

Disconnects ''channel''.  Returns undefined values.  In Posix terms this is `connect()` with an argument whose address family is `AF_UNSPEC`.

`(datagram-channel-connected-host `''channel''`)`

Returns the host to which ''channel'' is connected, or `#f` if there is none.  The value returned need not be the same as the value passed to `datagram-channel-connect!`, but must be acceptable to another invocation of `datagram-channel-connect!`.

`(datagram-channel-connected-port `''channel''`)`

Returns the port to which ''channel'' is connected, or `#f` if there is none.  The value returned need not be the same as the value passed to `datagram-channel-connect!`, but must be acceptable to another invocation of `datagram-channel-connect!`.

`(datagram-channel-send `''channel''` `''bytevector''` `[''start'' [''end'']]`)`

Send the portion of ''bytevector'' defined by ''start'' (inclusive) and ''end'' (exclusive) to the connected endpoint of ''channel''.  If ''end'' is omitted, it is the length of ''bytevector'' plus one; if ''start'' is omitted, it is 0.  It is an error if ''channel'' is not connected.  Returns undefined values.  In Posix terms this is `send()`.

== Example: TFTP ==

TFTP is a simple UDP-based protocol documented in RFC 1350.  For our purposes, all that matters is that the client sends the first datagram and the server sends exactly one response to each datagram (assuming no loss of packets in transmission).

The server uses `(make-datagram-channel 69)` to create a datagram channel listening on UDP port 69 and then uses `(datagram-channel-receive-from `''chan''` `''bytevector''`)` to obtain an initial datagram.  The server then calls `(make-datagram-channel)` to create a new datagram channel listening on a randomly chosen port.  This datagram channel is then connected with `(datagram-channel-connect! `''client-host''` `''client-port''`)` to the client's host and port, and the initial datagram is processed and replied to.  All further transactions with that client are performed over the newly created channel.

The client starts by using `(make-datagram-channel)` and then `(datagram-channel-connect! `''chan''` `''host''` 69)` to connect to the server.  The initial datagram is sent with `(datagram-channel-send `''bytevector''`)`.  When the server replies, the channel is reconnected with `(datagram-channel-connect! `''host''` `''server-port''`)` and the remaining datagrams are sent over the channel.

== Issues ==

These names are very verbose, but I couldn't think of a better term than `datagram-channel`, which is borrowed from `java.nio.channels.DatagramChannel`.  This API is more powerful than Java's, though.

Should the ''end'' arguments be replaced by ''length'' arguments?

time

2011-08-10 12:08:51

version

8